Help Center

During our Research & Development Stage, we conclude that almost all the car brand internal car electronics fro both left hand and right hand drive are the same, the only difference is the dashboard fascia. 

Therefore, we implemented a revolutionary production method: our integrated slim car navigator is separated from our supplied car fascia. Compared to the One-Din or Double-Din Car Navigator in the market, our stereo is the easiest to install.

There are a few Advantages over the existing stereos:

1. Easier for fascia interchange.

2. Easier to upgrade to a later model of car navigator.

3. Faster Installation time.

4. More room for car navigator, and significantly lesser chance of overheating to occur.

Go to Settings --> Factory Setting (Password: 1686699)

Go to CAN Setting, you will see a sectioned menu:

Brand, Model, Version:

For example, if my car is Honda CRV 2017.

--> Then choose: (Brand = Honda); (Model = CRV); (Version = 2017)

--> and then click Finish, and lastly Click Save on upper right corner

In Factory Setting, you can also enable settings of your aftermarket car electronics.

Detailed steps are listed as pictures on below.

For Car Navigation Setting, please go CarSettings -> Navigation Settings

No matter your camera is from us or other aftermarket store, the installation method is the same. 

Important: Since all the aftermarket reverse cameras will ONLY be functionable if your car battery is approximately 12V, if your car battery is less or more than 12V, we recommend you to consult a car mechanic to solve this.

It normally happens when you have opened too many software in the background, but if it happens, it is extremely easy to fix.

There is 2 methods to fix glitches:

1) Swipe down from the top edge of monitor screen, you will see a button called "Memory Clean" (circled in red). Click that, your cache will be cleared and the glitches will be gone.

2) Prepare a toothpaste, and poke into a small hole called RST, which is the reset button to reset the car navigator back into factory mode but without erasing any of your settings

Make sure the connections are secure like as attached: